EIBOS CYCLOPES Dryer Box for 3D Printer Filament, 70℃ 150W PTC Heater Professional Filament Dryer , Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm Filame

EIBOS CYCLOPES Dryer Box for 3D Printer Filament

     .
  • .
  • 【Why the filament needs to be dry】All types of filaments will spontaneously absorb moisture in the air, which can cause serious damage to the filaments. Moisture absorption of the filament will not only make it brittle, but it will boil at a printing temperature of hundreds ℃ and generate a lot of bubbles. These bubbles will cause the printed items to have problems such as a decrease in viscosity between levels, abnormal colors, and rough surfaces, which will seriously affect the print quality.
  • 【Professional drying technology】Ordinary drying boxes usually use PI heating plates, which have low power and can only be heated to 55°C and require more than 4 hours to achieve the drying effect, and there is no humidity monitoring. Our drying box uses an advanced PTC heater with a power of up to 150W and can be heated up to 70°C. It only takes 1 hour to achieve the drying effect and displays the humidity in real time. PTC heaters are designed for high-end 3D printing enthusiasts.
  • 【Upgraded functions】Ordinary drying boxes can only be set to dry for up to 24 hours, but in addition to this, our drying boxes can also be set for unlimited drying! If you often use 3D printing, this is undoubtedly a very convenient function, so you don’t need to set it every time. It supports setting the temperature up to 70°C. In addition, it will automatically memorize your setting parameters, even if the power is off, it will not be affected.
  • 【Optimize the air duct, dry evenly】We have specially optimized the internal space of the drying box. The unique closed-loop hot air circulation air duct design makes the filament heated more evenly and drying more efficiently. Ordinary drying boxes often only rely on heating plates to heat, and the air cannot circulate, resulting in uneven drying of the filament, which reduces the print quality.
  • 【High compatibility】With large internal space, 4 rolls of 0.5kg filament or 2 rolls of 1kg filament or 1 roll of 3kg filament can be used at the same time. There are 8 holes distributed in the shell, which can output filaments in multiple directions, which is convenient for different types of 3D printers and multiple people to use. It supports filaments with diameters of 1.75mm, 2.85mm and 3mm, and filaments of various materials such as PLA, ABS, and nylon.
SKU: B094VJW127
Weight: 1 kg
Dimensions: 37.8 x 30.9 x 26.4 cm; 1 Kilograms
Brand: S SMAUTOP
Model: GFJ-S SMA-200
Manufacture: S SMAUTOP

Product Description

1111